The Loox driver is used in plug & play applications. Simply plug into an existing receptacle with the supplied cord to power your lighting system. A wall switch can be used as an on/off switch or a Hafele switch can be used to function the lights. The driver has 6 ports for lights and 1 port for a Hafele brand switch. Simply plug the desired lights and switch into the driver to install. No splicing, soldering or screwing required.
The Loox 12V Driver can only be used to power Loox 12V lights. Do not attempt to power other series or brands of lights with this driver.
To determine the total amount of lights that can be used per driver: add the wattage of the lights you wish to use. If the total wattage of the lights exceeds the maximum wattage of the driver then you must use a higher wattage driver or multiple drivers. (For Example. A 30W Max Driver can power 20ea Loox LED 2002 Down Lights. 1.5W per light multiplied by 20 = 30W).

• Wattage: 2.4 - 30 Watt
• Input Voltage: 100 - 240V / 50 -60Hz
• Output Voltage: DC 12V
• Degree of Protection: IP 20
• Ports for Lights: 6
• Ports for Switch: 1
• Power Cord: 78-3/4"
• Driver Dimensions: 6-1/2" x 2" x 1-1/8"
• NBH Number: 9577
• Item Number: 833.74.901

*Purchase Individually. Power Cord Included.